10 best biketek motorbike stands-

2407 Reviews Scanned And Analyzed

Top Customer Reviews: BikeTek Aluminium ...

Rating: 4 out of 5 with 6 ratings
5 / 5 Bernita
Strong as it looks but perhaps partorisca narrow partorisca some Supersports the bicycles & will be tightened too partorisca a lot of bicycles partorisca visit & cruisers.

Professionally built & simple to gather. The flanges of interior could be deburred better with grit paper but swimming but quality elsewhere.
4 / 5 Clorinda
A lot bad partorisca of the money, but ide pay more partorisca the sturdier the next time has produced
4 / 5 Hanh
Really poor, found has not done partorisca my bicycle has maintained partorisca slip
5 / 5 Werner
Absolute rubbishes, sports more regular the bicycles have the alike suspension and this have not done at all on mine, any easy to use and dangerous
4 / 5 Charley
Fast Delivery and produced adds. Utilisation he in my bicycle of race of the bandit. A lot of sturdy.
5 / 5 Deandre
The quality is no bad but lucido the model is not has adapted to all his motorcycles. It has bought the games join tender callejera RS, the motorcycle is practically impossible the crowbar and joins the time has created, is not stable. Pair against the Bequille the behind the same mark is niquel.

Trend BIKETEK Motorbike Stands

Top Customer Reviews: BIKETEK ALUMINIUM ...

Rating: 4 out of 5 with 1 ratings
4 / 5 Etta
The stand adds so only looks a width has had to that buy offset bobbins for an arm of transmission for mine 2015 fireblade

Top Customer Reviews: BikeTek Premium ...

Rating: 4 out of 5 with 1 ratings
4 / 5 Claretta
First of all thankyou the ARW Motorcycles partorisca rid the prompt day like this request, the service adds.
Has bought this Biketek front paddock stand to impulse my R1M partorisca general maintanence. He a work perfectly but like all front is has to that be used with the rear stand. Having a tapered the adjustable adapters means it will return bicycles with widths of variable fork.
In general more than happy with this paddock stand.

Top Customer Reviews: PDSHEAD01 - Biketek ...

Rating: 4 out of 5 with 16 ratings
4 / 5
In the first place a stand of bicycle is solid when gathered and is really well in that does and the chair sure has your bicycle in of the solid foundations, has arrived this in spite of in the box that that looked the homeless the person had been that bolt in him, basically really bad packed and so only launched in there with any old bits of map, are not joking and then the assembly is quite he directly advance it but some forks which control a jack the arm on is wider in a meaning of mouth when you insert/to insert a fat cane in the joint there a lot quite soiled to situate some pins in any side unless the the pair of pliers the clamp joints him.
Like this in general any one a better experience am sincere especially when I think that that it is £65 I thinks
4 / 5
This product has required some assembly and there is not any instruction. But you are using this to take your bicycle averts wont be science of rocket, seriously is two rays and two pins.

Has gathered once a mine of returns of the product 02 GSX-R600 like the glove there is no clearance the subjects and is very easy to use. I used it the pair to time already to clean a bicycle and does to clean some a lot of easier wheels. It is seated at present in the I so that continuous to have a wheel forward has changed.

The product adds would recommend. Has a behind being as it has taken with my bicycle.

A thing to remark. Any of some adapters would return my Dads VFR800 Vtec as it could not be used with east without purchasing a pin of addition. (It has not been bought to be used with this bicycle but something to remark).
5 / 5
This product is easy to dip joint and is solid. These stands, is returned your bicycle is like this more stable that a down type of fork, besides do the useful stand for him wants to take or change a place of some forks.
My Critique and an only reason did not give it 5 star is that for my bicycle of clue (Sv650) a kift isnt quite enough to impulse a wheel with sufficient clearance to take my wheel warmers on. So only it uses 2 pieces of 12mm layer each side of a wheel for one is to seat on, alternatively could return the main wheels! Some bicycles as mine Triumph Daytona has bit and of the pieces, ie a horn in a way that prevents an use of this type of the stand without assembly said roughly of a first bicycle.
Would buy again 100
4 / 5
Works, so only roughly... It is difficult to say yes is my incompetence or one are he, but a picture is misleading in that a wheel at the head of my Offer of Speed 955i was lifted grieve the millimetro of a paving. Has has had to that also chock some wheels of one are to prevent he of folding retreated up under a weight of a bicycle - there is remarked felizmente this whilst a wheel forward was has attached still! Still with the backside paddock the stand situates did not trust it enough to take a backup trolley jack was. Otherwise, Work well...
4 / 5
exelent The value for money has used on 2 different bicycles already to good sure will all the bicycles on stage very easy to use desire the ones of has bought some years could of has saved the small fortune if any one has any doubts take my word for him of the that only the buy calm will not be disappointed pt
4 / 5
Well but bulky and more headstock the adapters have required sure bicycles.
4 / 5
Ossia The very good element and works well in mine heavy motorcycle i.et. ZZR 1400, also is cost a lot well for money.
5 / 5
Ossia Stand of mine of advance of prime minister . It is a lot of sturdy and easy to use, very better that mine behind being which is quality lower and shaky for comparison.

Does perfectly with 2008 sv 650, has used one is to upgrade an oil of cradles/of the fork.
5 / 5
Easy to use, very stable and the tents was amiably. It has had to take the 27mm pin for mine zx7r but would recommend this to any one.
5 / 5
Excellent front paddock stand for the CBR600RR. For a prize are very happy.
4 / 5
I produce it adds the prize adds and good service very easy to dip near would recommend produced
4 / 5
uses partorisca the Yamaha r6 04. Used one 16,5 pin and feels correctly partorisca a bicycle! I recommend.
4 / 5
Very well has bitten of boxes a work adds on 600 hornet has not required partorisca take anthing of a bicycle partorisca the take the law loves that!
5 / 5
This stand is perfect and comes complete with all a fittings for ensures it can be used in the variety of bicycles.
5 / 5
Ossia For far better that a regular system, is more in side but value he for a value of product.
Recommends to all doing in an end at the head of the bicycle
5 / 5
a lot well with all the adapters, is returned mine 2011 r1 without subjects, the supposition will not require never pay to have the wheels have take still substitution of wheel again

Top Customer Reviews: MX REAR AXLE ...

Rating: 5 out of 5 with 1 ratings
5 / 5 Annette
The element adds. Exactly like this announced and delivery very fast.

Have a 10 best biketek motorbike stands question

Customer questions & answers 10 best biketek motorbike stands

Get to Know 10 best biketek motorbike stands

Manage 10 best biketek motorbike stands Content and Devices

10 best biketek motorbike stands Customer Service

Customer reviews for 10 best biketek motorbike stands