10 best creality 3d printer parts amp accessories-

5367 Reviews Scanned And Analyzed

Top Customer Reviews: Creality Upgrade 3D ...

Rating: 4 out of 5 with 6 ratings
4 / 5 Carma
I have bought this modification partorisca my new Creality Ender 3. It had had some subjects with an extruder regulate sometimes bending filaments that was neither too flexible or too rigid. It had listened it has had two options, 1 to 3D impression a cup improved with significantly reduces clearance among some train and a start buy this one with that has comprised already. He roughly another mods, as I have decided to so only go for a metal a here.
The installation was easy and some results so many has been far promising. I have printed down to 95A flexible without the subjects and a whole celery is far more rugged that a plastic original. An addition of Capricorn PTFE tubing certainly helps also.
Like this in general, would recommend this like a upgrade of an original element.
4 / 5 Clarisa
Has had finally some spare times to install a group of new extruder in my printer. It is an extruder of aluminium of creality, how is perfectly compatible with my discharge and game! It feels really solid, compared to an original plastic a. A main profit, is that a filament any shabbier feels a main crowbar, and this bad less filament stuck during feeding.
4 / 5 Gretchen
This element has been recommended for the fellow to substitute a plastic one this installs . It comes with all some split necessary extruder with part of metal. I have not had any @@subject and is now very strong and will last the long time. Highly it would recommend any with the plastic extruder to upgrade to this part.
5 / 5 Julius
Awesome Extruder, there is no @to @give the one who my old one slipped until I substituted it and suddenly all my questions have been he was. And I have used fake Capricorn tubing in a past.... Any value he a bit these works of materials like the sleep, to good sure recommend
5 / 5 Bunny
Easy to dip up and install thinner that a red a.
4 / 5 Deena
A straight substitution for an extruder to exist and bowden assembly of tube. It is returned easily.

Top Customer Reviews: Original Creality ...

Rating: 4 out of 5 with 6 ratings
4 / 5 Rosy
I have suffered filtering it hot-finalise which after the moment blobbed partorisca do. Any sake.
Am not experienced any one a lot in 3D printing still but comprise engineering a lot well.
A hot end is generally good but will suffer leaks after the while simple because of wrong assembly. That raisin.
Has purchased the new an only in-marry future questions. With which has repaired an original to run without filtering but has to that cut a insulation and is not one same afterwards. Some rays to said-gather is under a insulation. But assembly of the works will not ensure any evasions.
A new one has arrived today and my surprise adds had been upgraded. Yum.....
Now has the coverage of the silicone in some blockades of heat calms so much can take in some easy rays. Upper dogs.
Is not fearful that yes buy another a same thing will spend coz he probably no. An old one east doing well but has taken my new goodie manually ready yes has required.
Good eggs CREALITY.
Wise movement to maintain up with a joneses.
Nick
5 / 5 Maryrose
This element was faulty, an inner tube and ptfe has not gone correctly returned and has had escapes of filament and has finalised to melt a tubing has tried that pause to the vendor but was in firm that has purchased the printer of them when I use of no. to take tactical when you ask the substitution or repayment and expect you to expect the month until after returning an element to them for them to see is saying a truth. Chinese vendors all some same.
5 / 5 Hoyt
Has varied experience of years of 3D press. I have squandered The full day that tries to take this to do, with constant clogging every time has tried to print. It has given up in an end of a day, and has taken a thing averts to cannibalise my leading one and this new a. I have then found that a space among a heat-final and where a filament among (and in this model this new plus, has Luke hotend way ledge to take a tension of an extruder) was entirely EMPTY without PTFE tubing at all - a filament has heated up in a hotend, and that the filament has melted then was pooling all a way behind on a pause of red heat, so there was near 1 diameter of cm of spatial that a freely travelled filament by means of.
Gutted That am spent extra in a 'official' Creality produced when his control of quality is this poor.
4 / 5 Esteban
Instrument of quality of genuine substitution. Any subject with fitment or function. Returned in of the minutes to the printer that pursues 24/7, behind on and running press perfectly for the half an hour.
5 / 5 Marla
My one has said is that pic tip the coverage of blockade of heat of silicone
But description of Product there any coverage of blockade of heat of silicone when look
So that the product is coming without coverage of blockade of heat of silicone
4 / 5 Tyrone
Perfect substitution for mine ender 3. Installed quickly and was to arrive and running inside now half

Top Customer Reviews: Creality Upgrade ...

Rating: 4 out of 5 with 3 ratings
4 / 5 Madie
Amazing upgrade, extruder a lot of sturdy. The impressions are improved drastically with east. A must partorisca a upgrade
5 / 5 Lacy
has Bought this partorisca substitute my current hotend in an of my printers as it comes with a capricorn the tube and is fantastic quality and all the genuine parts, to good sure will be that it orders again partorisca mine other printers!
5 / 5 Cristie
Speedy The delivery and all the pieces have distributed like this pointed, havent is returned still like this bought partorisca having transmissions.

Top Customer Reviews: Creality 3D Direct ...

Rating: 5 out of 5 with 2 ratings
5 / 5
Well quailty. Arrived quickly. The dimensions were attentive
5 / 5
odd Sound partorisca say has gone , but has bought these partorisca substitute some suns that resists some (these are double) in mine 3d printer because an original some have had something dish and for so the beds to level was impossible. A lot happy with these and a printer now does sum.
# Image Product Name Score Check Price
1 first Creality 3D Printer Ender 3 Hotbed Glass Build Plate 235x235x3mm for Ender 3 Pro, Ender 5 Heated Bed Platform Surface Creality 3D Printer Ender 3 Hotbed Glass Build Plate 235x235x3mm for Ender 3 Pro, Ender 5 Heated Bed Platform Surface Creality 3D
9.9
Score
View Product
2 Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing, Upgraded MK8 Metal Feeder Extruder Frame, Pneumatic Couplers and 0.4mm Brass Nozzles for for Ender 3/3 Pro/5 CR-10 /10S/20 Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing, Upgraded MK8 Metal Feeder Extruder Frame, Pneumatic Couplers and 0.4mm Brass Nozzles for for Ender 3/3 Pro/5 CR-10 /10S/20 AnKun
9.6
Score
View Product
3 best Tresbro Creality MK8 Metal Extruder,Upgrade 3D Printer Parts Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5 Tresbro Creality MK8 Metal Extruder,Upgrade 3D Printer Parts Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5 Tresbro
9.3
Score
View Product
4 Original Creality 0.4mm Nozzles for 3D Printer Creality CR-10S Pro, CR-10S Pro V2, CR-10 Max Original Creality 0.4mm Nozzles for 3D Printer Creality CR-10S Pro, CR-10S Pro V2, CR-10 Max Creality
8.8
Score
View Product
5 Creality Assembled MK8 Hotend Kit, 24V 40W Ender3/ Ender 3 Pro 3D Printer Hot End for 1.75mm Filament with 5PCS Heated Bed Leveling Die Spring, 5PCS 0.4mm Nozzles, 3PCS Silicone Covers Creality Assembled MK8 Hotend Kit, 24V 40W Ender3/ Ender 3 Pro 3D Printer Hot End for 1.75mm Filament with 5PCS Heated Bed Leveling Die Spring, 5PCS 0.4mm Nozzles, 3PCS Silicone Covers AnKun
8.6
Score
View Product
6 Creality Upgrade Aluminum Bowden Extruder and 24V 40W MK8 Hot End Kit with Capricorn Premium Tubing for Ender 3/ Ender 3 Pro 3D Printer Creality Upgrade Aluminum Bowden Extruder and 24V 40W MK8 Hot End Kit with Capricorn Premium Tubing for Ender 3/ Ender 3 Pro 3D Printer AnKun
8.3
Score
View Product
7 Original Creality 3D Printer Extruder Hot End Assembled Kit 24V Hearter with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle for Ender 3, 3X, 3 Pro Original Creality 3D Printer Extruder Hot End Assembled Kit 24V Hearter with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle for Ender 3, 3X, 3 Pro Creality 3D
8.1
Score
View Product
8 Creality 3D Printer Enclosure with Constant Temperature, Fireproof Waterproof Dustproof Protective Cover Warm Tent for Ender-3 Pro/CP-01 / Ender-2 / CR-100 Printer Creality 3D Printer Enclosure with Constant Temperature, Fireproof Waterproof Dustproof Protective Cover Warm Tent for Ender-3 Pro/CP-01 / Ender-2 / CR-100 Printer AnKun
7.9
Score
View Product
9 3 * Creality 3D Ender 3 Orginial Build Surface Plate Sticker Sheet, Ender 3 Pro Heated Bed Replacement Tape for Creality 3D Printer CR-20 Size of 235 * 235mm 3 * Creality 3D Ender 3 Orginial Build Surface Plate Sticker Sheet, Ender 3 Pro Heated Bed Replacement Tape for Creality 3D Printer CR-20 Size of 235 * 235mm Creality 3D
7.5
Score
View Product
10 Creality 3D Direct Store POM Models Plastic Pulley, V Groove Ball Bearings Pulley Passive Round Wheels Roller For Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S [6 pcs] Creality 3D Direct Store POM Models Plastic Pulley, V Groove Ball Bearings Pulley Passive Round Wheels Roller For Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S [6 pcs] Creality 3D
7.3
Score
View Product

Trend Creality 3D Printer Parts & Accessories

Top Customer Reviews: Creality 3D Printer ...

Rating: 5 out of 5 with 2 ratings
5 / 5 August
Like this of then taking mine 3D Printer (GeeeTech A10M) has had compatible questions with a PLA warping in a hotbed. Any @@subject that combination of temperatures of nozzle and hotbed temperature I use a warping is there and creates an absolute nightmare partorisca complete a discharge of bases in a start of the impression. I maintain that it owes bit of snip of the how is resulted in of the questions in of the subsequent discharges and quite honradamente have me almost seen selling my printer and giving up.

A fellow recommended one of these enclosures of mine to try and solve a question and I was skeptical, but has explained like a temperature of stable air and a prevention of drought or cold airflow in an impression dramatically can reduce warping, has to say that it was corrected, has has deleted in fact my warping question altogether.

Loves this enclosure and while calm the enclosed maintenances and give it the pocolos small to warm to the temperature done the enormous different yours quality of impression. Highly recommend for any new to this and to good sure for a professional.
5 / 5 Dayna
Returns well, work a lot well isolate a heat, is not like this as well as I have expected with touching this in spite of. Still it would recommend like this done an impact, and can contribute to prevent warping.

Top Customer Reviews: Creality Assembled ...

Rating: 4 out of 5 with 3 ratings
4 / 5 Kimberely
Exactly that has required! My Ender 3 Pro the hot end has died on me in a worse to time like this I hopped on amazon and found this with delivery of next day, has arrived punctually and was packaged perfectly and was the genuine creality part, to good sure would purchase again
4 / 5 Magan
has Bought this like the substitution/upgrade my geeetech a20, ossia so better that a stock does exactly that is to suppose to and when being genuine creality gives the piece of imports partorisca know is taking quality
4 / 5 Liliana
the box Adds partorisca have. Works well and easy to use. Mina 3D printer is running so better now that has transmissions some parts. Good idea partorisca have spare parts in chance perhaps. Highly it would recommend this product.

Top Customer Reviews: Creality 3D Printer ...

Rating: 4 out of 5 with 36 ratings
5 / 5 Oralee
It has been it bit it skeptical as it do not have any description partorisca this when I have purchased, ossia a main reason partorisca me leaving this description.

Has to that say ossia an only better mod partorisca my Ender 3. His transformed my impressions & returns perfectly. The First claves of discharge likes him the glue, once a bed has cooled down my impressions are released with minimum endeavour. Any need partorisca adhesive, tapes or spray.

Requires the main cost bulldog to the clips like them some distributed with a Ender 3 is too small.

Any questions please partorisca ask
4 / 5 Theola
has taken a Creality read of glass when it take my Ender 3, so it has included the student of institute would owe that know these causes to heat demagnetization, and such the device like magnetic bed will result worthless quickly.
Is really be happy with a Creality the bed of glass is 3mm glass of fat boron that the very stable fact. There is some class of plasti- like coating partorisca improve is action . When Heated to 60c the parts adhere almost too well. The main flat parts is difficult to take is impacienta while his to cool down, still practically the explosions went by if a law remain to cool the temperature of room.

A plastic coating is a bit self cure, with light scratches of the scrapers that disappears over time.

More than trying to take some parts of a bed in situ, take a glass and leave it to cool in the discharge of metal, I a lot seldom require to king level a bed, and can do 10 is impressions before they level animal are required.

A pair of caveats, that probably apply to the glass beds more decent:-
A coating will exit yes vigorously scrubbed with isopropyl alcohol (99.9 pure) as so only clean it each one that 10 impressions or like this, and so only for sweet rubbing.
Has had to move a Z stop of axial final micro-transmission, like the thickness of a glass has caused a nozzle to clash to a bed with a micro-transmissions in his incumplimientos dipped, included with a bed cranked has won to the dipping the low plus of him.

A container arrives is robust and a lot cushioned, with clear identification of contents of glass.

Minus A star, like this still with careful cleaner, is obvious in some point in a future a dish will require to be substituted because of wear and tear in a plastic coating.
4 / 5 Jovan
Ossia My prime minister 3D printer and like this far am very pleased with him.
Has taken probably more with a longitude of the gather that Creality suggest but was quite easy that follows the video of assembly of the Youtube more than a page of the imprecise picture distributed with a printer. The subject real only was with a Z the trace of engine like seats too many near of a frame that leaves a walk of torsion out of alignment. This has required the shim to take right but has found of an update that could print of Thingiverse to properly the directed.
Finds to level a quite delicate bed, swipe and lose still.
This in spite of having built that, has varied a an engine properly and installed Priest in my PC all is well.
Has has printed felizmente the few small elements and has drawn something I using Tinkercad.
Some subjects with adhesion although it suspects concealed is further down the mine that diverse a bed with accuracy that anything wrong with a printer.
In general very pleased and recommended a product.
5 / 5 Carolin
Works as I expected it to, clean and flat surface well, although you owe temperature of bed of the increase I use 60°C and room of clock environmental temperature as if also cool an impression cools st some extremities and then curls, swimming concealed can not be cured for some tuning of temperature. You owe that move a transmission of limit of the bed on roughly 5mm to compensate for an extra thickness. Once you levelled it can find precise repeat when heated because of expansion of a glass.
5 / 5 Ivelisse
Excellent! Marcos the enormous difference. It transfers it heats really well and the adhesion is very good. It take the moment to dip up and was bit it fatter that has anticipated, but now is dipped up has has not had to do adjustments much more there with which 10+ impressions. Probably the must yes is printing a lot of models.
4 / 5 Ramon
It was having question with a nozzle that scrapes some impressions in some zones and a z offset any when being a lot down enough in another like this I upped a probing grille of 3x3 to 5x5, now see reason...

Is very better that an old surface but to the equal that can see in a graphs a 3x3 grille and a 5x5 the grille has the massive difference for a same surface.
5 / 5 Tanja
A bed in mine ender 3 was so only terrible, as it was in need of the bed of glass.

The adhesion is petfect every time, I whipe with IPA alcohol each one once in the moment for the maintain fresco.
5 / 5 Debby
At present they are that it uses a dish in a ender 3 pro, prefers some beds of glass to some magnetic, and with this dish I use the small quantity of Pritt clave for adhesion, will do a prize.
5 / 5 Merlyn
Works of amazing product astonishingly well. The impressions adhere a lot well without help and leave the arrival of quality of good inferior discharge.
5 / 5 Latonia
My ender 3 has had an uneven bed, printing in the glass has levelled all was and produce the very better result, has bitten of helps of spray of the hair with some impressions that the best stick to a bed.
5 / 5 Aurelio
A bed in mine ender 3 was so only terrible, as it was in need of the bed of glass.

The adhesion is petfect every time, I whipe with IPA alcohol each one once in the moment partorisca the maintain fresco.
4 / 5 Darby
PLA Claves like poo to the coverage & is almost impossible to take untill a bed cools.
Precise cleaned regularly but waters it that & wash on the liquids is all this is to require (better work that Isoproponal which is which is recommended usually)
4 / 5 Anika
Enormous improvement in a plastic bed accionaría. The distribution of heat is much more same and an adhesion is something on.
4 / 5 Vena
3D has printed the adhesion is a lot very the add upgrade for a creality printer.

4 star :- a creality the looks of logo in a base of some impressions
4 / 5 Kathryne
An interesting addition my printer. Any question with adhesion. Looks very Too much.
5 / 5 Freddie
Ossia So better that an original bed that goes in a ender 3, is perfectly flat and my amours of printer he
4 / 5 Esteban
No like this as well as it has expected. You impress them they do not stick to a glass. Very difficult to print to.
5 / 5 Tyrone
GLASS of GOOD QUALITY ,ESSENTIAL FOR WHEN you ARE 3D-PRINTING WITH FILAMENTS of BIG TEMPERATURE.
WHEN The EXTRA ADHESION Is REQUIRED JUST USE KAPTON TAPE IN THE CUP OF THE GLASS And YOU will OBTAIN EXCELLENT 👌🏻RESULTS.
THANKYOU CREALITY! And AMAZON👍
4 / 5 Maryrose
Excellent adhesion, cleaned and dried with isopropyl alcohol before and after each use. It has not used Never anything the adhesion of help, any clave of adhesive, hairspray etc.

Sometimes the impressions look the little too stuck, but at least has not moved or warped.
4 / 5 King
It was having questions with adhesion as I have purchased this, has a lot of fact well and leaves the smooth base that it is better that my final discharges. Utmost cost, a lot recommended
4 / 5 Milo
when being new to 3d the press has thinks that would treat to the desire of bed of the glass I hadnt annoyed, has squandered two days that tries to take anythink partorisca take it the included using the clave of glue has taken a good impression of two days partorisca try , big thumbs down of me.
5 / 5 Terence
Wants to, took the moment to take adhesion but using just alcohol to clean before each laws of impression to treat it! Also it leaves the surface adds in a fund of impressions
5 / 5 Lanie
could not take pla to stick a lot very like this I roughed the up with some sandpaper and cast of the claves! Changed of original surface like the bed would not level that it adds.
5 / 5 Megan
Still to an eye before trying with the legislation-the flange is not the flat piece of glass. It takes some the small pieces printed matter but big pieces where use a full bed is not possible. An adhesion is not that it is announced neither, quite poor!
4 / 5 Julieann
Has solved my bed aarping @subject with east has lost this in spite of an adhesion has had for my impressions.
The product adds so only need the roughest surface
5 / 5 Jim
has IMPROVED TOTALLY a quality of impression. Any movement in of the levels.
5 / 5 Anitra
Has taken this so it has been has said his best for adhesion and he flattwr surface. The centre of a bed is warped will be to send behind.
4 / 5 Dillon
It take a Creality read of glass when it take my Ender 3, so it has included the student of institute would owe that know these causes to heat demagnetization, and such the device like magnetic bed will result worthless quickly.
Is really be happy with a Creality the bed of glass is 3mm glass of fat boron that the very stable fact. There is some class of plasti- like coating partorisca improve is action . When Heated to 60c the parts adhere almost too well. The main flat parts is difficult to take is impacienta while his to cool down, still practically the explosions went by if a law remain to cool the temperature of room.

A plastic coating is a bit self cure, with light scratches of the scrapers that disappears over time.

More than trying to take some parts of a bed in situ, take a glass and leave it to cool in the discharge of metal, I a lot seldom require to king level a bed, and can do 10 is impressions before they level animal are required.

A pair of caveats, that probably apply to the glass beds more decent:-
A coating will exit yes vigorously scrubbed with isopropyl alcohol (99.9 pure) as so only clean it each one that 10 impressions or like this, and so only for sweet rubbing.
Has had to move a Z stop of axial final micro-transmission, like the thickness of a glass has caused a nozzle to clash to a bed with a micro-transmissions in his incumplimientos dipped, included with a bed cranked has won to the dipping the low plus of him.

A container arrives is robust and a lot cushioned, with clear identification of contents of glass.

Minus A star, like this still with careful cleaner, is obvious in some point in a future a dish will require to be substituted because of wear and tear in a plastic coating.
4 / 5 Cherri
Was bit it skeptical as it do not have any description thus when I have purchased, ossia a main reason for me leaving this description.

Has to that say ossia an only better mod for my Ender 3. His transformed my impressions & returns perfectly. The First claves of discharge likes him the glue, once a bed has cooled down my impressions are released with minimum endeavour. Any need for adhesive, tapes or spray.

Requires the main cost bulldog to the clips like them some distributed with a Ender 3 is too small.

Any questions please to ask
5 / 5 Cynthia
Ossia my prime minister 3D printer and like this far am very pleased with him.
Has taken probably more with a longitude of the gather that Creality suggest but was quite easy that follows the video of assembly of the Youtube more than a page of the imprecise picture distributed with a printer. The subject real only was with a Z the trace of engine like seats too many near of a frame that leaves a walk of torsion out of alignment. This has required the shim to take right but has found of an update that could print of Thingiverse to properly the directed.
Finds to level a quite delicate bed, swipe and lose still.
This in spite of having built that, has varied a an engine properly and installed Priest in my PC all is well.
Has has printed felizmente the few small elements and has drawn something I using Tinkercad.
Some subjects with adhesion although it suspects concealed is further down the mine that diverse a bed with accuracy that anything wrong with a printer.
In general very pleased and recommended a product.
4 / 5 Sandee
Was having question with a nozzle that scrapes some impressions in some zones and a z offset any when being a lot down enough in another like this I upped a probing grille of 3x3 to 5x5, now see reason...

Is very better that an old surface but to the equal that can see in a graphs a 3x3 grille and a 5x5 the grille has the massive difference for a same surface.
5 / 5 Edra
Has bought this with which have broken my magnetic foreigner accionaría in a Ender 3pro. It was incredibly easy to install for simply moving a Z-take up for -3mm.

Has had the few subjects with warping in mine bed which is like result in a gradual breaking of a leading foreigner. This has spent the plot of that was, any entirely, but enough to be easily done around.

The adhesion is a lot well when warm. I go it has bitten it overkill and use 80c for a first discharge for big impressions or for fine details in a base. Mark so only sure clean a bed with some class of alcohol regularly.

The impressions in fact will burst immediately when cold. A lot in satisfactory.
4 / 5 Dianna
At present are that it uses a dish in a ender 3 pro, prefers some beds of glass to some magnetic, and with this dish I use the small quantity of Pritt clave for adhesion, will do a prize.
4 / 5 Rheba
The shame does not come with bulldog clips. Adhesion any like this as well as magnetic bed, but is more level. Having The discharge a bed with the waters of discharge of sugar for pla impressions, and sometimes add the brim also yes is the particularly defiant impression
4 / 5 Lanny
I have taken this so it has been has said his best partorisca adhesion and he flattwr surface. The centre of a bed is warped will be partorisca send behind.
5 / 5 Kathy
Has ordered this partorisca relieve my bed of convex press. This in spite of, this dish of glass is also convex, this in spite of less than a bed partorisca print.

Top Customer Reviews: 3 * Creality 3D ...

Rating: 4 out of 5 with 8 ratings
5 / 5 Starla
Ossia The band of substitution of 3 printing surfaces. This is not some beds of impression .
These are so only bit it fatter that an original but there is not had to that regulate anything in a printer to use them.
A drawback that has with them is that has better adhesion that an original. Take the impressions of this surface is the plot the hardest that of an original. This can be seen like the good thing for some people this in spite of.
4 / 5 Fredrick
The discharge is exactly like original, and the perfect substitution.
Does not comprise the one who the people are speaking roughly, is quite obvious of a title that is SO ONLY a stiker has spent, but can peel of an old one of a glass of edge reads removable easily (to heat to 60-65C) and dip this one instead.
Really pleased
5 / 5 Lahoma
I wasnt having a lot of regime with my PLA that takes my bed to the equal that have bought in fact the bed of first glass that was well, but once has taken these a difference is incredible. It has stuck this to a underside of my beds of glass so that it is a surface is the pure walk and have a profit if a textured surface like a PLA sticks to with ease! An edition adds my ender 3. Ideal yours the original surface is resulting the little shabby.
5 / 5 Joane
Beware! It does not comprise a fibreglass has spent! It has stuck this directly to a bed of metal. Big deception. Impossible to take form without breaking a surface! Has has had to that now order a correct element elsewhere. Waste of money!
5 / 5 Linnie
Has substituted spent to bed heated in Creality Ender 3. Difficult to take an old but new coverage one has been in final
4 / 5 Lenna
Misleading. It has been expecting this to be a complete unit a lot so only a cup of him.
4 / 5 Carlo
Produced of good quality. You impress them it resists a lot very on that.
5 / 5 Johnny
When I Love the adhesion really of confidence to a dish of build I always use these. With the pertinent settings there has been has not failed never.

Top Customer Reviews: Tresbro Creality ...

Rating: 4 out of 5 with 30 ratings
4 / 5 Luanne
Well, although one jumps feels the little harder that an installed original in my printer. You will want to have a ray of tension of the sprint in a dipping a feeble plus or you will grind your filament.
Another thing the look was paralizaciones is an order installs this, no quell'I which has been returned an arm on last with a long ray; a tension in a cradle and that tries to resist he in place cause partorisca cross edge a hole in an engine. Instead dipped a cradle in an arm with which is returned.
5 / 5 Demetrius
This are add, an excellent substitution partorisca a plastic extruder that comes with printers like a cr10 and ender3.

Imagines this will last the longest plot.
5 / 5 Adelina
Easy install and parts of big quality. It was having question with down-extrusion in mine Ender-3 and found the to be caused by a plastic in an extruder that curves and not applying quite a lot of forces in some teeth of train. After installing is, has not had any subject.
5 / 5 Xiomara
A metal extruded is the better way that a plastic one this comes with a printer. Neither it has liked me to it red as it do not go with my colour of filament partorisca my upgrades so that the returns of money perfectly.

The product was easy to install and has taken so only the pocolos small.
5 / 5 Sierra
An add upgrade of a stock plastic creality one. It is much more rigid the one who grabs a better filament and is adjustable.
5 / 5 Cecile
Easy to return and more durable that a plastic incumplimiento extruder that wears after the moment.
5 / 5 Annmarie
Element a lot well does exactly that is to suppose to and is of the big quality.
5 / 5 Kristopher
A plastic extruder that comes like this splits of a Cr10s is prone the breaking.
Has decided to substitute this before this past.
Preventative Interview!!
Like this happy has done.
Feels solid and works fantastically.
A prevails added partorisca be able to regulate a cradle is the big plus !
Simple chance of transmission out of an old a. 4 rays. Simple.
5 / 5 Heath
Well, Although one jumps feels the little harder that an installed original in my printer. You will want to have a ray of tension of the sprint in a dipping a feeble plus or you will grind your filament.
Another thing the look was paralizaciones is an order installs this, no quell'I which has been returned an arm on last with a long ray; a tension in a cradle and that tries to resist he in place cause partorisca cross edge a hole in an engine. Instead dipped a cradle in an arm with which is returned.
4 / 5 Sharyl
Very better that plastic one is returned so rule in mine Ender 3 Pro
5 / 5 Shalonda
Gteat the element averts of has had a M3 the ray that loses, work well.
4 / 5 Malissa
Has Had an age @@subject old of the mine plastic extruder in mine Ender 3 wear-was and cause down extrusion, as I have opted the upgrade to an extruder of metal likes all the world-wide and his dog recommends.

This in spite of slightly more expensive that some extruders of usual red metal, has opted partorisca this model partorisca maintain my printer that looks like this reserved like possible (I am a lot of picky with colours).

Some instructions of installation were relatively directly advances with a subject only partorisca speak roughly when being that a washer/piece partorisca adjustment of tension of the cradle is not very described or outlined in one drives, although this piece is both self explanatory and unnecessary, as I will not be that it attacks down the points is.

Once installed and recalibrated, my subjects of extrusion have been gone entirely and any resurface until another creality-typical-experience looked with tugging in a hot end, entirely very joined to an extruder.

Like an additional, has had to that take the substitution has sent was like this of the edges to attach a idler to an arm of the extruder failed in my prime minister, but a lot so only was Tresbo incredibly apologetic and useful in an accident, a second I has received has resisted on perfectly well, as so only can assume that a first arm of the extruder there has been the fluke subject and is not orientative of any worries of qualities.

In general: both support of the client and an element was fantastic and highly recommends any with a regulate plastic creality extruder upgrade to this model in his first casualidad!
4 / 5 Maxwell
In the first place, can ignore the majority of some descriptions, eats:
- is not the Genuine Creality produced (Creality any of these.
- No among the 'Creality' branded box.
- Does not come with any additional freebies, like extra nozzles.

Reason loves this? If you are 'upgrading' yours printer so only reason, then perhaps this is not a hobby for you, particularly as you have not checked Thingiverse neither tried to buy on There. If has any subjects with some parts to exist (my plastic arm has broken) or or is trying to mitigate the future and calm subjects neither are not on the dot or does not love the better extruder, then ossia fantastic, and First mean you can maintain impression without expecting days for the part of substitution.

To a product. A good:
- the quality is decent. The holes are drilled in some right and threaded places properly. Attentive accesses.
- The Any @@@crumble or break a way one beats of original plastic part.
- I good looks. 'Creality' The text is the good touch .
- The Only in beaten a competition on Amazon to the equal that has the basic method to regulate a tension of cradle.

A bad:
- Some instructions suggest to locate a toothed piece in an engine to the rovescio, with some two black rays down. Any this. You will require to situate the perfectly in an axial first to return, and will not be able of the substitute or presionar he without taking an engine again. Mountain he with some rays on like this for some originals returning.
- A M3x18mm scrapes that I control an arm in place was too short. I have had to that substitute he with the M3x20mm ray.
- A cradle feels bit it too tended, included with a ray in a dipping a low plus. Ossia Extra puzzling given a crude that has been when doing adjustable. If anything, has to be too slack, leaving you for the do more tended to regulate a ray. Probably it exchanges this was punctual.
4 / 5 Diedre
Has had the just few questions with him of then dipping up. It resists a tight filament because of a tension to jump which in some he the calm chance of the one who has all the little release will cause skipped any and subjects of extrusion.
Honradamente wouldnt upgrade Unless really I owe that.
5 / 5 Estrella
Lovely extruder, the little tiny machining the characteristic these better that other clones have tried
5 / 5 Maude
I have wanted really upgrade my plastic Ender 5 plastic extruder, but didnt like a common red league a. This colour is perfect and is the thin upgrade ossia to good sure values to do yes have the plastic extruder.
5 / 5 Hans
A quality has built is well, has begun this in spite of in that has it underextrusion @subject because a M10 the connector has taken broken with which 1 month, suggests to buy another quality M10 connector llanta.
5 / 5 Toney
A metal extruded is the better way that a plastic one this comes with a printer. Neither it has liked me to it red as it do not go with my colour of filament for my upgrades so that the returns of money perfectly.

The product was easy to install and has taken so only the pocolos small.
4 / 5 Riley
Easy install and parts of big quality. It was having question with down-extrusion in mine Ender-3 and found the to be caused by a plastic in an extruder that curves and not applying quite a lot force in some teeth of train. After installing is, has not had any subject.
5 / 5 Daron
One adds upgrade of a stock plastic creality one. It is much more rigid the one who grabs a better filament and is adjustable.
4 / 5 Calandra
Has Had an age @@subject old of the mine plastic extruder in mine Ender 3 wear-was and cause down extrusion, as I have opted the upgrade to an extruder of metal likes all the world-wide and his dog recommends.

This in spite of slightly more expensive that some extruders of usual red metal, has opted partorisca this model partorisca maintain my printer that looks like this reserved like possible (I am a lot of picky with colours).

Some instructions of installation were relatively directly advances with a subject only partorisca speak roughly when being that a washer/piece partorisca adjustment of tension of the cradle is not very described or outlined in one drives, although this piece is both self explanatory and unnecessary, as I will not be that it attacks down the points is.

Once installed and recalibrated, my subjects of extrusion have been gone entirely and any resurface until another creality-typical-experience looked with tugging in a hot end, entirely a lot joined to an extruder.

Like an additional, has had to that take the substitution has sent was like this of the edges to attach a idler to an arm of the extruder failed in my prime minister, but a lot so only was Tresbo incredibly apologetic and useful in an accident, a second I has received has resisted on perfectly well, as so only can assume that a first arm of the extruder there has been the fluke subject and is not orientative of any worries of qualities.

In general: both support of the client and an element was fantastic and highly recommends any with a regulate plastic creality extruder upgrade to this model in his first casualidad!
4 / 5 Leda
Substitution of before well in mine Ender 2. Any question with him that like this never.
4 / 5 Digna
A metal extruded is the better way that a plastic one this comes with a printer. Neither it has liked me to it red as it has not been with my colour of filament for my upgrades so that the returns of money perfectly.

The product was easy to install and has taken so only the pocolos small.
4 / 5 Maggie
Well, Although one jumps feels the little harder that an installed original in my printer. You will want to have a ray of tension of the sprint in a dipping a feeble plus or you will grind your filament.
Another thing the look was paralizaciones is an order installs this, no quell'I which has been returned an arm on last with a long ray; a tension in a cradle and that tries to resist he in place cause to cross edge a hole in an engine. Instead dipped a cradle in an arm with which is returned.
5 / 5 Lawana
A plastic extruder that comes like this splits of a Cr10s is prone the breaking.
Has decided to substitute this prime of this past.
Preventative Interview!!
Like this happy has done.
Feels solid and works fantastically.
A prevails added to be able to regulate a cradle is the big plus !
Simple chance of transmission out of an old a. 4 rays. Simple.
4 / 5 Hiroko
In the first place, you can ignore the majority of some descriptions, eats:
- is not the Genuine Creality produced (Creality any of these.
- No among the 'Creality' branded box.
- Does not come with any additional freebies, like extra nozzles.

Reason loves this? If you are 'upgrading' yours printer so only reason, then perhaps this is not a hobby for you, particularly as you have not checked Thingiverse neither tried to buy on There. If has any subjects with some parts to exist (my plastic arm has broken) or or is trying to mitigate the future and calm subjects neither are not on the dot or does not love the better extruder, then ossia fantastic, and First mean you can maintain impression without expecting days for the part of substitution.

To a product. A good:
- the quality is decent. The holes are drilled in some right and threaded places properly. Attentive accesses.
- The Any @@@crumble or break a way one beats of original plastic part.
- I good looks. 'Creality' The text is the good touch .
- The Only in beaten a competition on Amazon to the equal that has the basic method to regulate a tension of cradle.

A bad:
- Some instructions suggest to locate a toothed piece in an engine to the rovescio, with some two black rays down. Any this. You will require to situate the perfectly in an axial first to return, and will not be able of the substitute or presionar he without taking an engine again. Mountain he with some rays on like this for some originals returning.
- A M3x18mm scrapes that I control an arm in place was too short. I have had to substitute he with the M3x20mm ray.
- A cradle feels bit it too tended, included with a ray in a dipping a low plus. Ossia Extra puzzling given a crude that has been when doing adjustable. If anything, would have to be too slack, leaving you for the do more tended to regulate a ray. Probably it exchanges this was punctual.
4 / 5 Chantel
Has bought this a first day has received my first 3D printer. Easy to install and works perfectly. I seat a right thing installs east. Any question.
4 / 5 Naoma
Has loved really upgrade my plastic Ender 5 plastic extruder, but didnt like a common red league a. This colour is perfect and is the thin upgrade ossia to good sure values to do yes have the plastic extruder.
4 / 5 Johnnie
A quality has built is well, has begun this in spite of in that has he underextrusion @@subject reason a M10 the connector has taken broken with which 1 month, suggests to buy another quality M10 connector llanta.
5 / 5 Lyda
One adds upgrade of a stock plastic creality one. It is much more rigid that grabs a better filament and is adjustable.




Have a 10 best creality 3d printer parts amp accessories question

Customer questions & answers 10 best creality 3d printer parts amp accessories

Get to Know 10 best creality 3d printer parts amp accessories

Manage 10 best creality 3d printer parts amp accessories Content and Devices

10 best creality 3d printer parts amp accessories Customer Service

Customer reviews for 10 best creality 3d printer parts amp accessories